2021 Ford Bronco: Here’s how you lower and remove the soft topMarch 2, 2021
Ford’s reborn is shaping up to be of the hottest new vehicles to come out in, well, decades. This retro-inspired off-roader not only looks great and promises to deliver loads of capability, it also offers plenty of customizability thanks to its patented modular design. Its standard soft top, for instance, conveniently locks in several positions and is fully removable so you can enjoy an unobstructed view of the sky above. Here’s what you need to know about getting the most out of this origami-like roof. We’re going to use a four-door Badlands trim as our demonstration vehicle, but the same basic process applies to the two-door model, as well.
Enjoying a little fun in the sun while driving youris simple. To retract the top, simply release a pair of interior latches on the windshield header bar. Just pull down (it takes good bit of force, so be warned) and the front of the roof disconnects from the body. Next, push the leading edge of the fabric top upward and rearward in an arc until it safely latches in position. Unless you have arms as long and flexible as elephant trunks, you’ll probably have to stand up on the sill or seat (shoes off, or course).
The top on this four-door model opens further, but before you can fully lower it, you have to undo the panels on the sides and rear of the vehicle. Fortunately, this is also a simple task, as they’re all held on by Velcro and a few clasps. Just undo these attachments, unhook the side window panels and they slide out of their corresponding grooves. It’s simple! (Note: Sliding them back into place can take a bit more effort, so be patient).
Next, while standing on the second-row driver’s side sill, you pull a small lever, which undoes latches on both sides of the roof assembly. This allows you to push the top stack further back, to lock it safely in position behind the cargo area. This provides an unobstructed view of the sky above for everyone in the vehicle, not just folks in the front seats. (Ford has done a particularly good job with this — even on the four door, there’s no center support brace between the two rows of seats to ruin the view like there is in a).
Finally, the Bronco’s entire soft-top assembly can be removed, but this takes a bit of work and a pal. You’ve got to crawl into the back and pop off a plastic trim piece on each side of the cargo area. With the toolkit that comes standard with every, you can then access the six 13-millimeter bolts that hold the assembly in place. Once these are removed, you and a decently muscular friend can carefully lift the roof, which, along with the windows and associated brackets, weighs 110 pounds, off the back of the vehicle.
For additional details and to see all this in action, be sure to watch our video embedded above. And if you can’t get enough 2021 Ford Bronco, we also have separate video features aboutand and so make sure to check those out.